1050 North Rancho Drive Suite B Las Vegas, NV 89106
702-636-1955
Mon-Fri:
8:00am-5:00pm
WE SPEAK SPANISH

PRESPRAYS

Residential

DIRT CHASER



The next generation of pre-sprays is here. Dirt Chaser is an enzyme based pre-spray/booster that breaks up both soils and proteins from synthetic fibers. Dirt Chaser's unique chemistry makes it resistant to both pH and temperature extremes making it effective as both a pre-spray and as a booster for other pre-sprays. Dirt chaser can also be used as an enzyme/protein spotter. This product meets the CRI (Carpet and Rug Institute) standards for cleaning stain resistance carpet.

pH: 10 (diluted)
Dilution: up to 1:100

To use as an enzyme booster for your favorite pre-spray dilute 1/2 cup into your 5 quart injection sprayer or 1-2 ounces per gallon for your pump-up sprayers.

ULTRA TLC



Ultra TLC is the answer when you need maximum cleaning power with a low pH. Ultra TLC attacks soil with the ferocity of a high pH cleaner yet it is safe for all wet cleanable fiber types.

pH: 8 (diluted)
Dilution: up to 1:100

  • This is a Hyper concentrate solution. Shake well before each use. Using a dilute solution of Ultra TLC, pre-spray heavy soil areas of carpet and agitate gently to emulsify and suspend soil prior to hot water extraction.
  • For upholstery check material for dye stability then apply with trigger sprayer to soiled area and agitate gently yet thoroughly with soft brush.
  • For rugs or carpet apply evenly with pump sprayer then agitate soiled areas thoroughly with soft brush.
  • Following your application of Ultra TLC Step 2 proceed to “Natural Fiber Cleaner Step 3”.

Commercial

EXTREME CLEAN



Extreme Clean is the maximum strength high pH concentrate with all the additives, builders, and solvents you need for extremely soiled carpets. It is designed for use in commercial applications such as restaurants, apartments, etc. to reduce your cleaning time. It is a dual purpose cleaner that can be used as a pre-spray or extraction emulsifier. Extreme Clean is not recommended for use on 5th generation stain resistant carpets.

pH: 11 (diluted)
Dilution: up to 4 oz. per gallon

  • As a Pre-spray: Use 2 oz. “Extreme Clean” per gallon of water and dissolve completely.
  • For injection sprayers such as Hydro-Force, dissolve 18 oz. of “Extreme Clean” into 1 gallon of water for concentrate solution.

FIRESTORM HIGH pH PRE-SPRAY



Firestorm is the maximum concentrate ultimate cleaner for extremely soiled carpets. It is designed for use in commercial applications such as restaurants, apartments, etc. where extremely heavy soil is encountered. Firestorm is not recommended for use on 5th generation stain resistant carpets or natural fibers.

pH: 13 (diluted)
Dilution: Up to 2 oz. per gallon

  • As a Pre-spray: Use 2 oz. Firestorm per gallon of water and dissolve completely.
  • For injection sprayers such as Hydro-Force, dissolve 18 oz. of Firestorm into 1 gallon of water for concentrate solution

FIRE WATER



As the name implies FIRE WATER is a complete, very high performance carpet cleaning compound. It combines the detergency of ULTRA TLC with a higher pH. The result is a cleaner that is unbeatable for the tough fine particulate soils such as red clay, carbon dust, filtration, etc. It is effective on both oil and water soluble soils.

pH: 11 (diluted)
Dilution: Up to 1:100

  • Using a dilute solution of Fire Water pre-spray heavy soil areas of carpet and agitate gently to emulsify and suspend soil prior to hot water extraction.

EXTRACTION

PC-45



PC-45 saves times and improves results. It gives you immediate power to eliminate difficult spots during your cleaning process. Use it to blow away troublesome spots that defy your normal pre-spray and extraction. Simply spray the spot, agitate and watch it disappear as you extract.
PC-45 is ready to use. Simply put a trigger sprayer (set to coarse spray) on the bottle then keep it handy on your belt as you clean. When you encounter a troublesome spot, just shoot it, agitate, and continue with your extraction

pH: 10 (diluted)
Dilution: Ready to Use

NATURAL FIBER CLEANER



Natural Fiber Cleaner is designed to safely and thoroughly clean those difficult to clean natural textiles, such as Haitian or Natural Cottons that are prone to yellowing and browning. You will find this product to be helpful in restoring fabrics that have been discolored due to improper cleaning procedures.

pH: 8.5 (diluted)
Dilution:
Truck Mount:
Normal cleaning dilute 1½ lbs. (3 cups) Natural Fiber Cleaner powder into 5 gallon concentrate solution and run flow meter 3 to 4 GPH. For corrective cleaning double the concentration or increase flow meter to 5 to 6 GPH.

Portable:
Add 1/2 cup Natural Fiber Cleaner per 5 gallons of water.
For corrective cleaning of stain damaged textiles, double the concentration.

PRO-MAX



“Pro-Max” is a maximum duty emulsifier for use with hot water extraction cleaning systems. A powerful cleaner for both residential and commercial carpets. Quickly rinses away heavy greasy soils and meets stain resistant specifications. Pump Guard technology lubricates and protects your chemical feed pump prolonging the life of your truck mounted equipment..

pH: 10.5 (diluted)
Dilution:
Truck Mount:
Use 1 ½ lbs. (3 cups) of powder per 5 gallons of water for concentrate solution. Set Chemical injection at 2 GPH for stain resistant carpet 3-4 GPH for commercial and non-stain resist.
Portable:
Use 2 ounces per 10 gallons hot water for stain resistant cleaning and 3 ounces per 10 gallons hot water for non-stain resistant.

Copyright 2016 - Kc Supply. All Rights Reserved